The Jeep Wrangler is popular because of its rugged nature and off-road capabilities. Many Jeep Wrangler owners have the convenience of being able to start their vehicle remotely with either a key fob or a mobile device.
If you’re not falling into them, you may be thinking about how to remote start Jeep Wrangler with key fob or mobile device.
To remote start a Jeep Wrangler with a key fob, you have to press and hold the “Lock” and “Unlock” buttons simultaneously for around three seconds. However, to remote start a Jeep Wrangler with a mobile device, you will need to have an aftermarket remote start system installed.
In this guide, we will cover the steps necessary to successfully remote start your Jeep Wrangler with a key fob or mobile device. We will also discuss the various safety features of remote starting and the benefits of having it available in your Jeep Wrangler. So let’s get started.
What Is Remote Start in Jeep Wrangler and How Does It Work?
A remote start in a Jeep Wrangler is a feature that allows the owner to start their vehicle remotely, usually through a key fob or mobile phone. This feature is convenient for those who want to warm up their Jeep on a cold morning or cool it down on a hot day before they get inside.
The way it works is quite simple. A remote starter kit is installed in the Jeep Wrangler and connected to the vehicle’s electrical system. This kit contains a transmitter, receiver, and wiring harness.
The transmitter is usually a key fob that sends a signal to the receiver when the button is pressed. The receiver then uses the wiring harness to communicate the signal to the vehicle’s electrical system, which activates the ignition system and starts the engine.
Benefits of Remote Starting Your Jeep Wrangler
Remote starting your Jeep can offer several benefits to Jeep owners. Here are some of the key advantages:
- Comfort: Remote starting your Jeep Wrangler allows you to start it up from the comfort of your own home, avoiding the need to walk out to the vehicle in cold or inclement weather. This can be especially useful during the winter months when you don’t want to brave the cold to start your car.
- Convenience: This feature will offer the added convenience of being able to start up your car while you’re still in the house, meaning you don’t have to wait outside for it to warm up. This can save you time and effort and make your morning routine much easier.
- Safety: Remote starting your Jeep Wrangler also offers safety benefits, as it can be used to locate your vehicle if it has been stolen. By using the remote start feature, you can activate the car alarm, making it easier to locate the vehicle and making it less likely that the thief will get away with it.
- Security: Remote starting your Jeep Wrangler can also provide added security for your vehicle, allowing you to lock your car from a distance. This means you can lock your car before leaving it unattended, which can help deter would-be thieves.
How to Remote Start a Jeep Wrangler with a Key Fob?
Remote starting your Jeep Wrangler can be a convenient way to start your vehicle without leaving the comfort of your home or office. Using the key fob included with your Jeep Wrangler, you can easily and quickly start your vehicle from a distance.
What You Need
- Jeep Wrangler
- Key fob
- Locate the Key Fob: The key fob is usually attached to a key ring and can be found in your vehicle’s glove box or center console.
- Program the Key Fob: You will need to program the key fob to your Jeep Wrangler before you can use it to start your vehicle remotely. Refer to your Jeep Wrangler’s user manual for detailed instructions on programming the key fob.
- Press and Hold the Remote Start Button: Once the key fob is programmed, press and hold the remote start button located on the key fob for two to three seconds. The button is usually labeled with the words “Remote Start.”
- Wait for the Vehicle to Start: You should hear the engine of your Jeep Wrangler start-up within a few seconds after pressing the remote start button.
- Enter the Vehicle and Drive: Once the engine has started, you can enter and drive as usual.
How to Remote Start a Jeep Wrangler with a Mobile Device?
Remote starting a Jeep Wrangler can be a great way to get your engine running and ready to go on a hot summer day, or to defrost the windshield on a cold winter morning. With the right equipment and a few easy steps, you can use your mobile device to start your Jeep Wrangler in no time.
What You Need
- An Aftermarket Remote Start System: The most important thing you’ll need to remote start your Jeep Wrangler is an aftermarket remote start system. Various systems are available, so you may have to research to find one that suits your needs and is compatible with your vehicle.
- An Enabled Smartphone: You’ll also need a smartphone or tablet that is enabled for the remote start system you are using. Many systems have their app that you can download to your device, or you may need to purchase a separate device to access the remote start features.
- Read the Manual: Before installing the remote start system, you should read the instructions carefully. If you have any questions, contact the manufacturer for additional help.
- Install the System: Once you’ve read the instructions and understand how the system works, you’ll need to install the system in your Jeep Wrangler.
- Connect to Vehicle: After installing the remote start system, you’ll need to connect it to your vehicle’s electrical system. This will enable the system to be used to start the engine.
Using the Remote Start
- Download the App: Once the remote start system is installed and connected to the vehicle, you’ll need to download the app that comes with it. This app will allow you to control the system from your mobile device.
- Activate the System: Open the app and activate the system. It helps you to control the system from your mobile device.
- Start the Vehicle: Finally, you’ll be able to start your Jeep Wrangler from your mobile device. Simply press the “Start” button, and your engine will start up and be ready to go.
After Reading the above guide, you may gather information about how to remote start Jeep Wrangler with key fob or mobile device. Typically, remote starting your Jeep Wrangler with a Fob and a mobile device is easy and convenient to get your vehicle running without the hassle of a physical key.
It is a great way to enjoy the convenience of keyless entry and start without worrying about carrying a traditional key around. With the help of an app, you can easily and securely set up a remote start for your Jeep Wrangler. The process is simple and straightforward, and you can ensure that your vehicle is secure from unauthorized access.