Lincoln MKT Door Makes a Squeaking Noise When Opening or Closing (Causes and Solutions)

ByChalobah Leonard General Car Tips

When opening or closing the door of your Lincoln MKT, do you hear a squeaking noise? This can be a source of irritation and a sign that something is wrong with your door.

The most likely cause of the squeaking noise is that the door hinges need to be lubricated. You can apply a lubricant such as WD-40 to the hinges. If the squeaking persists, the hinges may need to be replaced.

In this article, we will examine the causes and solutions for Lincoln MKT door makes a squeaking noise when opening or closing. With this knowledge, you can ensure that your Lincoln MKT door operates smoothly and silently.

What Causes a Squeaking Noise When Opening or Closing a Lincoln MKT Door?

Owners of Lincoln MKTs may notice an annoying squeaking noise when they open or close their vehicle’s doors. This noise can be caused by various factors, some of which are easy to address, while others may require a trip to the mechanic.

Lack of Lubrication

One of the most common causes of a squeaking door is a lack of lubrication. The door hinges on the Lincoln MKT can become dry and worn over time, leading to an audible squeak when the door is opened or closed.

Damaged Gaskets

Another potential cause of a squeaking door is a damaged gasket. Gaskets are responsible for sealing the gap between the door and the frame, and when they become worn or torn, air can escape, leading to squeaking noise.

Loose Hinges

If the door squeak persists after lubricating the hinges, the issue may be a loose hinge. The hinges on the Lincoln MKT can become loose over time, leading to a squeaking noise when the door is opened or closed.

Rust on the Door Components

One of the most common causes of squeaking noise when opening or closing a Lincoln MKT door is rust on the door components. Rust can form on the door components over time due to moisture, and this can cause the components to squeak when the door is opened or closed.

Potential Solutions to a Squeaking Lincoln MKT Door

A Lincoln MKT door can be incredibly annoying when it begins to squeak. Fortunately, a few potential solutions to the squeaking door may help quiet the noise.

  1. Lubricate the Door Hinges: The most common cause of squeaking doors is a lack of lubrication on the door hinges. Applying a lubricant such as WD-40, silicone spray, or cooking oil can reduce squeaking. Simply spray the lubricant onto the hinges and open and close the door a few times to help it work its way into the hinges.
  2. Tighten the Hinges: If lubricating the hinges does not help, the hinges may become loose over time. To fix this, you can use a screwdriver to tighten the screws on the hinges. This will help to reduce the squeaking.
  3. Replace the Door Hinges: In some cases, the hinges may be too worn out or damaged to be repaired. If this is the case, the entire door hinge need to be replaced. This can be done by a professional or by following online instructions.
  4. Apply Weather Stripping: Another potential cause of squeaking doors is a lack of weather stripping. Weatherstripping is an important part of providing insulation and soundproofing in a vehicle. To fix this, you can apply new weather stripping around the door frame to reduce the squeaking.

How to Tighten Door Parts to Stop Squeaking on a Lincoln MKT?

If you own a Lincoln MKT, you may have noticed that the door parts can start to squeak over time. The good news is that you don’t need to replace the parts to eliminate the squeaking; you can tighten them to stop the noise. Here is how to do it:

  1. Start by inspecting the door’s hinges, latches, and other components. Look for any loose parts or bolts that need tightening.
  2. Use a metric socket to tighten the nuts and bolts on the door parts. You should only use the correct size and torque setting for each part.
  3. Once the nuts and bolts have been tightened, use a lubricant such as WD-40 to lubricate the hinges and latches. This will help to reduce friction and reduce the squeaking noise.
  4. If the door still squeaks after these steps, you may need to replace the parts. You should use the right parts for your Lincoln MKT to ensure a proper fit and reduce noise.

How to Lubricate the Door Parts to Stop Squeaking on a Lincoln MKT?

Lubricating door parts on a Lincoln MKT to stop squeaking is a relatively easy process that can be completed in just a few steps. Below are some essential points to help get you started:

  1. Start by removing any door panel that may be blocking the door parts. There are several types of door panel clips and screws, so consult your owner’s manual before attempting to remove them.
  2. Once the door panel has been removed, you can begin lubricating the door parts. Start by lubricating any exposed hinges and latches with a silicone-based lubricant. This type of lubricant is designed to prevent rust and reduce door squeaking.
  3. Next, use a small brush to apply a thin layer of lubricant to any exposed moving parts. You have to cover all surfaces thoroughly but avoid getting lubricant on the door’s paint job.
  4. After lubricating, test the door’s functionality to ensure everything is working properly. Finally, re-install the door panel and screws once everything is working properly.

When to Call a Professional for a Squeaking Lincoln MKT Door?

If the Lincoln MKT door squeak persists even after lubrication, tightening, and cleaning, it may be time to call a professional. This can be especially true if the door is difficult to open, close, or latch. A professional technician can diagnose the issue and determine the best solution.

They can identify if the door is misaligned, damaged, or worn out, as well as if the hinges, latches, and weatherstripping need repair or replacement.

A professional can inspect the door for any rust or corrosion, as these issues can cause squeaks. If the door is warping excessively, they can determine if it needs to be adjusted or replaced.

What to Do When a Lincoln MKT Door Doesn’t Close Properly

When a Lincoln MKT door doesn’t close properly, there are a few steps you can take to rectify the issue. Here are some points to consider:

  1. Check the Door Latch: Ensure the latch is properly engaged and that the door is aligned correctly. The door may not close properly if the latch is loose or not properly engaged.
  2. Inspect the Hinges: Inspect the door’s hinges to ensure they are not worn or broken. If they appear to be in bad condition, they may need to be replaced.
  3. Look for Obstructions: Check for any obstructions that may be preventing the door from closing properly. If any items are blocking the door’s path, remove them and try again.
  4. Grease the Hinges: Applying a light coat of grease to the hinges can help the door close properly, reducing friction.
  5. Adjust the Striker Plate: The striker plate is the metal plate on the door frame, which the door latch engages with. The door may not close properly if the striker plate is not correctly aligned. You should adjust the striker plate if needed.

Final Thoughts

The cause of the squeaking noise when opening or closing the Lincoln MKT door can be attributed to a lack of lubrication on the door hinges. To solve this issue, the hinges should be lubricated regularly with a silicone-based lubricant.

This will reduce squeaking noise and ensure that the door opens and closes smoothly. Taking care of the problem sooner rather than later will help to prevent any further damage to the door and its hinges.