Mercury Montego Door Makes a Squeaking Noise When Opening or Closing (Causes and Solutions)

The Mercury Montego is a reliable and stylish mid-sized sedan that many people have come to rely on. Unfortunately, it can be annoying when the door of your Mercury Montego starts to squeak when you open or close it. This isn’t just an embarrassing noise; it can also be a sign that something isn’t quite right with the door.

The most likely cause of the squeaking noise is a lack of lubrication on the door hinges or an accumulation of dirt and debris. To resolve the issue, you have to lubricate the hinges with a silicone-based lubricant and clean any dirt and debris from the hinges and surrounding areas.

In this guide, we’ll discuss the possible causes of a squeaking Montego door and how to fix it. With the right knowledge and a bit of effort, you’ll soon be able to get your Montego door squeak-free.

Is it Normal for a Mercury Montego Door to Squeak?

Yes, it is normal for a Mercury Montego door to squeak. This is because the door hinges can start to loosen over time, allowing the door to wobble and shift in its frame. This causes the metal components to grind together and produce a squeaking sound.

Additionally, the metal parts can corrode, which can also cause the door to squeak. The good news is that it is relatively easy to fix a squeaky door on a Mercury Montego.

What Causes a Squeaking Noise in a Mercury Montego Door when opening or closing?

Squeaking noises coming from the door of a Mercury Montego can be caused by various issues. Let’s take a look at some of the potential causes:

  • Worn-out Hinges: The hinges that connect the door to the car’s frame can become worn out over time. This can lead to squeaking noises when opening or closing the door.
  • Loose Door Panel Screws: The screws that hold the door panel in place can become loose over time. As a result, the panel will rub against the door frame, creating a squeaking sound.
  • Improper Lubrication: If the door hinges are not regularly lubricated, they can squeak when opened or closed. This is because the metal parts of the hinges are rubbing against each other without proper lubrication.
  • Worn-out Weatherstrips: The weatherstrips around the edge of the door may become worn out over time. This can make a squeaking noise when the door is opened or closed because the weatherstrips are not creating a tight seal.

What to Do When a Mercury Montego Door Squeaks?

Squeaky doors on a Mercury Montego can be incredibly annoying and embarrassing. Fortunately, there are a few easy ways to keep your doors silent when opening or closing.

1. Lubricate the Hinge

One of the most common causes of squeaky doors is that the hinge is not properly lubricated. To lubricate the hinge, start by removing any dirt and debris from the hinge. You can do this by using a rag and some rubbing alcohol. Once the hinge is clean, apply a lubricant like WD-40 or a silicone-based lubricant. However, you should allow the lubricant to dry completely before opening or closing the door.

2. Adjust the Hinge

If lubrication does not fix the squeaky door, you may need to adjust the hinge. You can do this by using a screwdriver or Allen wrench to loosen the screws on the hinge. Then, move the door slightly up and down or side to side. This will help the door fit snugly against the frame and reduce the noise it makes when opening or closing.

3. Realign Components

The noise may be due to misaligned components. If this is the case, the solution is to realign the components. This may require loosening the screws that hold the part in place and adjusting them to the correct position.

4. Replace the Hinge

In some cases, the hinge may be worn or damaged beyond repair. If this is the case, you will need to replace the hinge entirely. A professional mechanic or handyman should do this. Replacing the hinge will help you ensure that the door is securely attached to the frame and closes and opens smoothly.

Following the same solutions, you can also fix your Hyundai I30 Door makes a squeaking noise when opening or closing.

How to Lubricate a Squeaky Door on a Mercury Montego?

Lubricating a squeaky door on a Mercury Montego is a relatively simple job that can save you from the embarrassment of a loud, squeaky door. Here are some steps to follow to help get the job done quickly and easily.

  1. Start by cleaning the area around the hinges. Ensure the hinges are free of dirt and debris. You can do this with a damp cloth or a vacuum cleaner.
  2. Apply a lubricant to the hinges, such as WD-40 or silicone-based lubricant. Spray a liberal amount of lubricant and rotate the hinge several times to help it spread evenly and penetrate the hinge.
  3. Wipe off any excess lubricant with a dry cloth and ensure the hinges are free of dirt or debris.
  4. Repeat the lubrication process on the other side of the door if necessary.
  5. Finally, use a different type of lubricant on the latch or lock mechanism of the door. This area needs a different lubricant to ensure the lock works properly.

How to Maintain a Mercury Montego Door to Avoid Squeaking?

Maintaining a Mercury Montego door to avoid squeaking requires regular attention and periodic maintenance. Here are some tips on how to keep your Montego door silent:

  • Lubricate the Hinges: The hinges on the Montego door are prone to rust, which can cause squeaking. To avoid this, lubricate the hinges monthly with WD-40 or a similar lubricant. This will reduce friction and prevent squeaks.
  • Keep it Clean: Dust, dirt, and other debris can accumulate in the hinges and cause squeaking. To prevent this, clean the hinges by regularly wiping them down with a damp cloth.
  • Check the Weatherstripping: Weatherstripping is essential to keep the door sealed and prevent squeaks. If the weatherstripping becomes worn or damaged, it should be replaced immediately to avoid squeaking.
  • Tighten the Screws: If the screws holding the hinges are loose, it can cause squeaking. Check the screws regularly and tighten them if necessary.

How to Tell If You Need to Replace Your Mercury Montego Door Handle?

If your Mercury Montego door handle doesn’t seem to be functioning properly, the first step is to determine whether it needs to be replaced. Door handles are one of the most used parts of your vehicle, so take the time to inspect them thoroughly to ensure it’s in good condition.

The first sign of wear to look for is visible damage. You’ll need to replace the handle if it is cracked or bent. You should also look for signs of rust or corrosion, indicating the handle is no longer functioning properly.

Next, try to open and close the door with the handle. If you struggle to do so, or the handle comes off in your hand, it’s time to replace it. You should also check the handle to ensure its securely attached. Loose handles can be a safety hazard, so if the handle is loose, it should be replaced.

Finally, inspect the handle for any signs of wear and tear. If the handle is worn down, it may be time to replace it. You have to also check the area around the door handle for signs of wear. If this area is worn or frayed, it’s likely time to replace the handle.

Final Thoughts

Hopefully, you now have an adequate idea about the causes and solutions for the Mercury Montego door makes a squeaking noise when opening or closing. In general, it can’t be denied that the squeaking noise when opening or closing a Mercury Montego door can be an annoying problem. But it can be solved with a few simple solutions.

These solutions include lubricating the door hinges, cleaning off debris, or replacing the worn-out hinges. Taking the time to fix this issue will ensure you can continue to open and close your doors without a squeaking sound.